Mainsheet traveler

Learn More

Torlon kogels ter vervanging van de kogels in gelagerde Harken small boat wagens. Learn More

A new ‘Racing’ track has 25mm (63/64") stop hole spacing for even more precise control of the car position and sheeting angle. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Learn More

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Learn More

Series 26 End Cap, Plastic, 34mm x 32mm ... Learn More

Series 30 Traveller Car, 100mm, Shackle, 2xM6 Holes ... Learn More

Series 30 Traveller Car, 150mm, Shackle, 2xM6 Holes ... Learn More

Series 30 Traveller Car, 220mm, Shackle, 4 Control Sheaves ... Learn More

Series 30 Traveller Car, 225mm, 4 Control Sheaves, 2 Cleats ... Learn More

Series 30 Sliderod Car, 110mm, Shackle, 2xM6 Holes ... Learn More

Series 30 Control End, Single Sheave & Becket ... Learn More

Series 30 Control End, Double Sheave & Becket ... Learn More

Series 30 Track, Black, 996 mm M8 CSK fastener holes. Pitch=100mm Stop hole pitch=50mm... Learn More

Series 30 Track, Black, 1996 mm M8 CSK fastener holes. Pitch=100mm Stop hole pitch=50mm... Learn More

Series 30 Track, Black, 2996 mm M8 CSK fastener holes. Pitch=100mm Stop hole pitch=50mm... Learn More

Series 30 Track, Black, 5996 mm M8 CSK fastener holes. Pitch=100mm Stop hole pitch=50mm... Learn More

Series 30 End Cap, Plastic, 37mm x 37mm ... Learn More

Harken Micro rail eind kapjes 13mm (per 2). Learn More

High-performance end controls allow the installation of 2:1 to 4:1 purchases. Designed for high-performance, free-running systems, Carbo control blocks with Delrin® ball bearings let cars instantly adjust and release under load. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Learn More

Harken Smallboat rail hoog eind kapjes (per 2). Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Learn More

Learn More

High-performance end controls allow the installation of 2:1 to 4:1 purchases. Designed for high-performance, free-running systems, Carbo control blocks with Delrin® ball bearings let cars instantly adjust and release under load. Learn More

Race once with the windward sheeting traveler car and you’ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Learn More

Use with 2751 Small Boat pinstop track. Learn More

When end control assemblies are used, trim caps finish track ends. Learn More

When end control assemblies are used, trim caps finish track ends. Learn More

Adjustable hardcoat-anodized aluminum pinstop end controls limit car movement on the track. Learn More

Fits T3204B.HL, T3224B.HL, T3234B.HL, and T3244B.HL cars. Learn More

Endstops are designed to absorb shock loads and should be installed when end controls are not used. Learn More

When end controls are not used, add endstops to absorb shock loads. Learn More

When end controls are not used, add endstops to absorb shock loads. Learn More

ESP end controls are value-oriented options for the installation of 2:1 to 5:1 systems. Designed for strength and durability, controls feature axle bearing sheaves with sideload ball bearings. Learn More

ESP end controls are value-oriented options for the installation of 2:1 to 5:1 systems. Designed for strength and durability, controls feature axle bearing sheaves with sideload ball bearings. Learn More

ESP end controls are value-oriented options for the installation of 2:1 to 5:1 systems. Designed for strength and durability, controls feature axle bearing sheaves with sideload ball bearings. Learn More

When end controls are not used, add endstops to absorb shock loads. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. All Midrange track is predrilled with holes for mounting fasteners and one pinstop hole between each fastener. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. All Midrange track is predrilled with holes for mounting fasteners and one pinstop hole between each fastener. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. All Midrange track is predrilled with holes for mounting fasteners and one pinstop hole between each fastener. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. All Midrange track is predrilled with holes for mounting fasteners and one pinstop hole between each fastener. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. All Midrange track is predrilled with holes for mounting fasteners and one pinstop hole between each fastener. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. All Midrange track is predrilled with holes for mounting fasteners and one pinstop hole between each fastener. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. CB (Captive Ball) high-beam variable hole spacing track is used to span cockpits or other unsupported areas. Track features internal slide bolts, allowing new track to be installed without drilling additional holes. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. CB (Captive Ball) high-beam variable hole spacing track is used to span cockpits or other unsupported areas. Track features internal slide bolts, allowing new track to be installed without drilling additional holes. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. All Big Boat track is predrilled with holes for mounting fasteners and one pinstop hole between each fastener. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. All Big Boat track is predrilled with holes for mounting fasteners and one pinstop hole between each fastener. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. All Big Boat track is predrilled with holes for mounting fasteners and one pinstop hole between each fastener. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. All Big Boat track is predrilled with holes for mounting fasteners and one pinstop hole between each fastener. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. All Big Boat track is predrilled with holes for mounting fasteners and one pinstop hole between each fastener. Learn More

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Learn More

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. T2703B and T2703B.HL cars feature stand-up toggles with ears, allowing attachment of separate Carbo control blocks for a free-running, high-performance system. Learn More

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Learn More

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Learn More

Kits are available for Midrange cars with ESP controls and ESP end controls to upgrade purchase from 1:1 to 4:1. Please note: the T27KIT can be used for 25mm sheaves only. Learn More

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Learn More

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Learn More

Kits are available for Midrange cars with ESP controls and ESP end controls to upgrade purchase from 1:1 to 4:1. Please note: the T32KIT can be used for 35mm sheaves only. Learn More

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Learn More

Endstops are designed to absorb shock loads and should be installed when end controls are not used. Learn More

Endstops are designed to absorb shock loads and should be installed when end controls are not used. Learn More

Learn More

Learn More

Splice links join track and keep it aligned during installation. Learn More

When end control assemblies are used, trim caps finish track ends. Learn More

When end control assemblies are used, trim caps finish track ends. Learn More

When end control assemblies are used, trim caps finish track ends. Use with track/rail: 2720 / 2751. Learn More

Learn More

When end control assemblies are used, trim caps finish track ends. Use with track/rail 373 Learn More

When end control assemblies are used, trim caps finish track ends. Learn More

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Learn More

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Learn More

Use the 2705 control tang set for 1:1 purchase (no end controls necessary). Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Learn More

Torlon Thermoplastic is een uitzonderlijk sterk schokbestendig lagermateriaal dat bestand is tegen langdurig gebruik en zware schokbelastingen. Torlon kogels met een diameter van 3/16 inch (4,76 mm) en verpakt per 20 stuks. Voor gebruik in de Harken Micro wagens. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. High-beam variable hole spacing track is used to span cockpits or other unsupported areas. Track features internal slide bolts, allowing new track to be installed without drilling additional holes. Learn More

When end control assemblies are used, trim caps finish track ends. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Learn More

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Learn More

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Learn More

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Learn More

Harken® ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Loop cars matched with Carbo T2 Air blocks attached with high-tech line provide the ultimate lightweight, low-profile system. Learn More

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Learn More

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Learn More

Overloopwagens 16mm rail met doorlopende delrin kogellagers. Wordt ook toegepast voor geleiding van schuifdaken. Learn More

Overloopwagens 16mm rail met doorlopende delrin kogellagers. Wordt ook toegepast voor geleiding van schuifdaken. Learn More

Alle wagens hebben interne controleschijven. De toggle-sluitingen met anti-kantel buffers zijn geschikt voor directe montage van de Barton cruiser serie. Learn More

Alle wagens hebben interne controleschijven. De bloksluitingen met anti-kantel buffers zijn geschikt voor directe montage van de Barton cruiser serie. Learn More

Alle wagens hebben interne controleschijven. De bloksluitingen met anti-kantel buffers zijn geschikt voor directe montage van de Barton cruiser serie. Learn More

Eindstop 20mm + schijf + hondsvot / paar Learn More

Endstopklem 20mm recht / paar Learn More

Endstopklem 26mm recht / paar Learn More

Endstopklem 20mm schuin / paar Learn More

Endstopklem 26mm schuin / paar Learn More

Endstopklem 30mm schuin / paar Learn More

Klemmenset voor wagen 26mm Learn More

Learn More

Learn More

Learn More

Learn More

Barton rail (Gel.) 20mm 1.20m. Type met verzonken schroefgat. Boutafstand 100mm Learn More

Barton rail (Gel.) 20mm 1.80m Learn More

Learn More

Barton rail (Gel.) 26mm 1.80m Learn More

Barton wagen 50x40mm, RVS gelagerde wielen. Voor 19mm rail Learn More

Learn More

Kunststof eindstop voor 19mm I-rail (per paar) Learn More

Plunjerstop voor 19mm I-rail. Per paar Learn More

Barton wagen met 4 rvs, gelagerde wielen. 70x45mm. Voor 25mm I-rail Learn More

Learn More

Eindstop voor 24mm I-rail. Learn More

Verstelbare Plunjerstop voor 24mm I-rail (per paar) Learn More

Zilver geanodiseerde aluminium T-rail voor alle sledes uit het Belship programma. Door de lichte holte aan de onderzijde kan de rail ook op ronde vlakken gemonteerd worden. Learn More

Zilver geanodiseerdeT-rail voor alle sledes uit het Belship programma. Door de lichte holte aan de onderzijde kan de rail ook op ronde vlakken gemonteerd worden. Learn More

Zilver geanodiseerdeT-rail voor alle sledes uit het Belship programma. Door de lichte holte aan de onderzijde kan de rail ook op ronde vlakken gemonteerd worden. Learn More

Zilver geanodiseerdeT-rail voor alle sledes uit het Belship programma. Door de lichte holte aan de onderzijde kan de rail ook op ronde vlakken gemonteerd worden. Learn More

Learn More

Learn More

Learn More

Zilver geanodiseerdeT-rail voor alle sledes uit het Barton programma. Door de lichte holte aan de onderzijde kan de rail ook op ronde vlakken gemonteerd worden. Learn More

Zilver geanodiseerdeT-rail voor alle sledes uit het Belship programma. Door de lichte holte aan de onderzijde kan de rail ook op ronde vlakken gemonteerd worden. Learn More

Zilver geanodiseerdeT-rail voor alle sledes uit het Belship programma. Door de lichte holte aan de onderzijde kan de rail ook op ronde vlakken gemonteerd worden. Learn More

Zilver geanodiseerde T-rail voor alle sledes uit het Belship programma. Door de lichte holte aan de onderzijde kan de rail ook op ronde vlakken gemonteerd worden. Learn More

Zilver geanodiseerdeT-rail voor alle sledes uit het Belship programma. Door de lichte holte aan de onderzijde kan de rail ook op ronde vlakken gemonteerd worden. Learn More

T-rail 20mm eindstuk met schijf Learn More

T-rail 25mm eindstuk met schijf Learn More

T-rail 32mm eindstuk met schijf Learn More

Kunststof eindstop 20 mm rail. zwart (paar) Learn More

Kunststof eindstop 25 mm rail. zwart (per paar) Learn More

Kunststof eindstop 32 mm rail. zwart (paar) Learn More

Type 2 montageplaten voor afneembare overlopen voor een vrije doorloop in de kuip. Door de borgpennen te verwijderen is de overloop snel te verwijderen. Wordt geleverd per set. Learn More

Learn More

Bag of 100 replacement Delrin balls to suit Lewmar blocks. Please refer to the specification of each size for more details. Learn More

Ronstan RC7251-1.0A T-rail 25 mm 1.00 mtr. Learn More

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Learn More

Learn More

Learn More

Learn More

Learn More

Learn More

1 meter Genuarail 32mm Learn More

Zilver geanodiseerd aluminium met bout en stoppergaten

Afmeting mm : 32 x 6, Lengte m : 1,50

Learn More

Learn More

Learn More

Learn More

Learn More

Learn More

Ronstan RC1220-6.0 rail 22 mm zwart 6,00 mtr Learn More

rail 32 mm / 1.5 mtr Learn More

Ronstan kunststof eindstop voor 32mm rails Learn More

Lewmar's Ocean car range is now obsolete but you can still purchase some spares. Learn More

Learn More

29170045bk sz0 car end cap kit Learn More

29170045bk sz0 car end cap kit Learn More

29172045bk sz 2 end cap kit Learn More

Learn More

Learn More